Voodoo Lab Pedal Power 2 Plus Manuale Utente Scaricare il pdf (Pagina 13)

EFX MkIII+ Audio Controller User Manual 13

If you are already in the Edit Mode, press/hold theྙ PS-1 switch(FS, function select) to

set the popping noise reduction control until the Pr .2 is shown on the display.

Press/hold theྚ BANK UP switch to set a popping noise reduction control from Pr.0

through Pr.4.

It will automatically be stored in memory when you r eturn to Preset Mode.

Pr0 means the popping noise reduction control is not used.



Pr4 means the maximum of the popping noise reduction control.

Note

* The initial default setting is Pr.2.

3.3.8 Control the Pedal Switcher

When you need more audio loops, you can use the Pedal Switcher of Voodoo Lab. The Pedal Switcher

accepts only MIDI SysEx messages. The EFX MkIII+ can transmit these messages.

If you are already in the Edit Mode, press/hold theྙ PS-1 switch(FS, function select)

to control the Pedal Switcher until the PS.F is shown on the display.

Press theྚ BANK UP switch to select PS.n.

Press theྛ MODE switch to store the function and return to Preset Mode.

ྜ Select the preset to be programmed in the Preset Mode.

Press theྜྷ MODE switch to enter the Instant Access Mode. The display will show:

And the 4 LEDs above PS-1 ~ PS-4 switches will indicate the corresponding Loop1 ~

Loop4 as on or off.

Activate all the Pedal Switcher loops you want.ྞ

Press theྟ BANK UP switch to store the edit and return to Preset Mode, or press the BANK DOWN switch

to return to Preset Mode without storing the edit.

Follow the same procedure as ~ for any other presets you want to program into the Pedal Switcher.ྠྜྟ

Note

*ThePS.F and PS.n mean Pedal Swither On and OFF.

* The initial default setting is PS.F.

* EFX MkIII+ can control 128 presets for the Pedal Switcher.

(from bank 1 preset 1 to bank 32 preset 3 and global preset)

4. Power Requirements

The EFX MkIII+ Audio Controller requires a regulated 12VDC or 9VAC at approximately 250mA. The power

jack is a standard 5.5mm/2.1mm barrel.

The EFX MkIII+ Audio Contr oller can also be powered from outputs 5 or 6 of the Voodoo Lab Pedal Power 2

Plus. You must set the corresponding DIP switch away from the normal position.

1 2 ... 8 9 10 11 12 13 14 15 16 17 18

Nessun commento

Voodoo Lab Pedal Power 2 Plus Manuale Utente Pagina 13